BACTERIOLOGICAL INCUBATOR (LAB TYPE) SS-13

  1. Incubators Are Sturdy Double Walled Units.
  2. Inner Chamber Made Of M.S. /S.S. And Outer Made Of Mild Steel With Powder Coating.
  3. Gap between the Walls Fitted with glass wool insulation to avoid heat loses.
  4. Heating elements are made of high grade chrome plated nicrome wire.
  5. Temp. Is controlled by thermostat.
  6. Temp. range 5˚c above ambient to 60˚c and accuracy: ±2˚c (with digital accuracy ±0.5˚c)
  7. Air ventilations are provided on the top of the unit to remove the hot gases/ fumes.
  8. In lab type incubators heaters are placed in the bottom side of the unit.
  9. All the control switches & pilot lamps are fitted on the front panel.
  10. Trays should be supplied with G.I. Wire mesh.

Optional Accessories

  1. Air circulation fan for uniform temperature.
  2. Digital temp. Controller cum indicator in lieu of thermostat with an accuracy of ±0.5˚c.
  3. S.S. trays.

STANDARD SIZES AVAILABLE

  • S. No. Size In Inches (WXDXH)
  • 1. 12"×12"×12" (30×30×30 Cm.)
  • 2. 14"×14"×14" (35×35×35 Cm.)
  • 3. 18"×18"×18" (45×45×45 Cm.)
  • 4. 18"×18"×24" (45×45×60 Cm.)
  • 5. 24"×24"×24" (60×60×60 Cm.)
  • 6. 18"×24"×36" (45×60×90 Cm.)
  • 7. 24"×24"×36" (60×60×90 Cm.)
Drop An Enquiry Go to top

BACTERIOLOGICAL INCUBATOR (MEMMERT TYPE) SS-14

  1. Bacteriological Incubators Are Sturdy Double Walled Units.
  2. Inner Chamber Made Of M.S. /S.S. And Outer Made Of Mild Steel With Powder Coating.
  3. Gap between the Walls Fitted with glass wool insulation to avoid heat loses.
  4. Heating elements are made of high grade chrome plated nicrome wire.
  5. Temp. Is controlled by thermostat.
  6. Temp. range 5˚c above ambient to 60˚c and accuracy: ±2˚c (with digital accuracy ±0.5˚c)
  7. Air ventilations are placed on top of both sides to remove the hot gases/ fumes.
  8. In Memmert Type Units heaters are placed at the right and left side of the inner chamber.
  9. All the control switches & pilot lamps are fitted on the front panel.
  10. Trays should be supplied with G.I. Wire mesh.

Optional Accessories

  1. Air circulation fan for uniform temperature.
  2. Digital temp. Controller cum indicator in lieu of thermostat with an accuracy of ±0.5˚c.
  3. S.S. trays.

STANDARD SIZES AVAILABLE

  • S. No. Size In Inches (WXDXH)
  • 1. 12"×12"×12" (30×30×30 Cm.)
  • 2. 14"×14"×14" (35×35×35 Cm.)
  • 3. 18"×18"×18" (45×45×45 Cm.)
  • 4. 18"×18"×24" (45×45×60 Cm.)
  • 5. 24"×24"×24" (60×60×60 Cm.)
  • 6. 18"×24"×36" (45×60×90 Cm.)
  • 7. 24"×24"×36" (60×60×90 Cm.)
Drop An Enquiry Go to top

B.O.D. INCUBATOR (SS-2)

  1. Designed Specially Biological Oxygen Demand Determination and Other Applications like general incubation, Serum Studies and Enzyme Assays Tests.
  2. Castor Wheel Mounted Cabinet Is Double Walled.
  3. Inner chamber made of S.S. outer chamber made of M.S. with powder coating.
  4. Full length inner glass/ acrylic door permits inspection of specimens without disturbing the temperature.
  5. Temp. Controlled by digital temp. Controller cum indicator. Temperature range 5˚c to 60˚c with an accuracy of ±0.5˚c.
  6. This unit is fitted with door operated illumination lamp inside the chamber.
  7. Equipped with hermitically sealed compressor CFC free.
  8. Air circulation fan for maintaining temp. Uniformity throughout the chamber.
  9. Flush fitting insulated double walled door has magnetic gasket.
  10. The chamber is provided with modular removable shelves made of S.S. for complete flexibility is use.
  11. Inner chamber is fitted with refrigeration evaporator, heater and air circulator for creating positive.
  12. Air flow throughout the inner chamber for temp. Uniformity.
  13. To work at 230V A.C. only.
  14. Puf insulation.
Drop An Enquiry Go to top

CONSTANT TEMPERATURE WATER BATH (SS-5)

  1. Double walled in construction.
  2. Inner chamber and lid made of stainless steel. Outer chamber made of mild steel with powder coating.
  3. Glass window is fixed on the front for both sides clear observations while immersion test.
  4. The gap between the chambers filled with high grade glass wool to minimize the heat loss.
  5. Temp. Range from above 5˚c ambient to 98˚c and temp. Controlled by digital temp. Indicator cum controller with an accuracy of ±0.5˚c.
  6. A high speed stirrer with a motor of 1/20 Hp is fitted to the unit for continuous stirring and this can maintain a uniform heating throughout the chamber.
  7. The heating mechanism comprises of sets of heaters pertaining to fast heating to operate 230 volts AC only.
  8. Designed for immersion requirements and for external circulation to maintain constant temp.
  9. To operate 230 volts AC only.

STANDARD SIZES AVAILABLE

  • S. No. Size In Inches Rating Watts(1200˚c)
  • 1. 12"×10"×8" 1.5
  • 2. 18"×12"×10" 2.0
  • 3. 18"×14"×12" 2.5
Drop An Enquiry Go to top

WATER BATH THERMOSTATIC (SS-26)

  1. Double walled in construction.
  2. Inner chamber S.S. and outer made of M.S. with powder coating.
  3. Temp. Range 5˚c above ambient to 95˚c accuracy ±2˚c.
  4. Temp. Controlled by capillary type thermostat.
  5. Top lid with concentric rings made of stainless steel.
  6. The gap between the inner and outer chamber filled with glass wool insulation to minimize heat loss.
  7. Immersion type heater should be provided.
  8. Long lasting elements.
  9. Concentric rings to use flask from 50ml to 500ml capacity.

STANDARD SIZES AVAILABLE

  • S. No. Size Dimensions
  • 1. 6 hole 35×25×10 cm.
  • 2. 12 hole 40×30×10 cm.
Drop An Enquiry Go to top

HEATING MANTLE

  1. Body of the mantle made of spun joint less aluminium.
  2. Heating element kintted fibre glass netting properly insulted.
  3. Long lasting element made by nicrome wire.
  4. Maximum surface temp. 400˚c.
  5. Temp. Controlled by energy regulator.
  6. Non breaking nichrome connection having porcelain beeds covered to nett.
  7. Easy to replace the netts.

STANDARD SIZES AVAILABLE

  • S. No. SIZE AVAILABLE RATING WATTS
  • 1. 250ml 150
  • 2. 500ml 200
  • 3. 1Ltr. 300
  • 4. 2Ltrs. 450
  • 5. 3Ltrs. 500
  • 6. 5Ltrs. 700
  • 7. 10Ltrs. 1000
  • 8. 15Ltrs. 1800
Drop An Enquiry Go to top

SOXHLET APPARATUS

  1. Quick surface heating save extraction time.
  2. Fiber glass hand knitted heating surface having nicrome heating elements.
  3. Body made up of M.S. with powder coating.
  4. The housing has two retort rods and a cross bar.
  5. This apparatus has a built in regulator which controls the heater.
  6. Heating elements have a individual regulator.
  7. Pilot lamp to indicate working of the elements.
  8. To work on 230 volts AC only.
  9. Various capacities available like 250ml, 500ml & 1ltr. capacity.
Drop An Enquiry Go to top

HOT AIR OVEN (BOTTOM HEATER) SS-17

  1. Hot air ovens are sturdy double walled units.
  2. Inner chamber made of S.S. and outer made of mild steel with powder coating.
  3. Gap between the Walls Fitted with glass wool insulation to avoid heat loses.
  4. Heating elements are made of high grade chrome plated nicrome wire.
  5. Temp. Is controlled by thermostat.
  6. Temp. range 50˚c to 250˚c and accuracy: ±2˚c (with digital accuracy ±1˚c)
  7. Air ventilations are provided on the top of the unit to remove the hot gases/ fumes.
  8. In lab type oven heaters are placed in the bottom side of the unit.
  9. All the control switches & pilot lamps are fitted on the front panel.
  10. Trays should be supplied with G.I. Wire mesh.

Optional Accessories

  • Air circulation fan for uniform temperature.
  • Digital temp. Controller cum indicator in lieu of thermostat with an accuracy of ±1˚c.
  • S.S. trays.
  • STANDARD SIZES AVAILABLE

    • S. No. Size In Inches (WXDXH)
    • 1. 12"×12"×12" (30×30×30 Cm.)
    • 2. 14"×14"×14" (35×35×35 Cm.)
    • 3. 18"×18"×18" (45×45×45 Cm.)
    • 4. 18"×18"×24" (45×45×60 Cm.)
    • 5. 24"×24"×24" (60×60×60 Cm.)
    • 6. 18"×24"×36" (45×60×90 Cm.)
    • 7. 24"×24"×36" (60×60×90 Cm.)
    Drop An Enquiry Go to top

    HOT AIR OVEN (MEMMERT TYPE) SS-18

    1. Hot air ovens are sturdy double walled units.
    2. Inner chamber made of M.S./S.S. and outer made of mild steel with powder coating.
    3. Gap between the Walls Fitted with glass wool insulation to avoid heat loses.
    4. Heating elements are made of high grade chrome plated nicrome wire.
    5. Temp. Is controlled by thermostat.
    6. Temp. range 50˚c to 250˚c and accuracy: ±2˚c (with digital accuracy ±1˚c)
    7. Air ventilations are placed on the top of both sides to remove the hot gases/ fumes.
    8. In memmert type units heaters are placed at the right and left side of the inner chamber.
    9. All the control switches & pilot lamps are fitted on the front panel.
    10. Trays should be supplied with G.I. Wire mesh.

    Optional Accessories

    1. Air circulation fan for uniform temperature.
    2. Digital temp. Controller cum indicator in lieu of thermostat with an accuracy of ±1˚c.
    3. S.S. trays.

    STANDARD SIZES AVAILABLE

    • S. No. Size In Inches (WXDXH)
    • 1. 12"×12"×12" (30×30×30 Cm.)
    • 2. 14"×14"×14" (35×35×35 Cm.)
    • 3. 18"×18"×18" (45×45×45 Cm.)
    • 4. 18"×18"×24" (45×45×60 Cm.)
    • 5. 24"×24"×24" (60×60×60 Cm.)
    • 6. 18"×24"×36" (45×60×90 Cm.)
    • 7. 24"×24"×36" (60×60×90 Cm.)
    Drop An Enquiry Go to top

    HOT PLATE (RECTANGULAR)

    1. Body made of thick M.S. / S.S.
    2. Top plate over hangs by supporting of ceramic beeds which ensures air insulation between plate and base unit.
    3. Selection cast iron / S.S. plate.
    4. Maximum surface temperature 300c.
    5. Temp. controlled by energy regulator.
    6. Long last nichrome elements.
    7. Various sizes available.
    8. To work on 230 volts AC only.

    Sizes Available: (Round) Rating Watts-1500
    20cm (8") dia. Rectangular Rating Watts

    • S. No. SIZE AVAILABLE RATING WATTS
    • 1. 25×30 cm. 150
    • 2. 25×40 cm. 200
    • 3. 30×35 cm. 300
    • 4. 45×60 cm. 450
    Drop An Enquiry Go to top

    HOT PLATE (ROUND)

    1. Body made of thick M.S. / S.S.
    2. Top plate over hangs by supporting of ceramic beeds which ensures air insulation between plate and base unit.
    3. Selection cast iron / S.S. plate.
    4. Maximum surface temperature 300c.
    5. Temp. controlled by energy regulator.
    6. Long last nichrome elements.
    7. Various sizes available.
    8. To work on 230 volts AC only.

    Sizes Available: (Round) Rating Watts-1500
    20cm (8") dia. Rectangular Rating Watts

    • S. No. SIZE AVAILABLE RATING WATTS
    • 1. 25×30 cm. 150
    • 2. 25×40 cm. 200
    • 3. 30×35 cm. 300
    • 4. 45×60 cm. 450
    Drop An Enquiry Go to top

    HUMIDITY CHAMBER (ENVIRONMENTAL TEST CHAMBER) SS-12

    1. Creating ideal conditions for industrial component/ product research and bio technical specification test.
    2. Most accurate and reliable chamber for long term high temperature and Rh testing.
    3. Temp. Range 10˚c to 60˚c with an accuracy ±1˚c. Relative humidity range 35%Rh to 85%Rh with an accuracy ±3%Rh.
    4. A positive vertical air circulation ensures temp. and Rh uniformity.
    5. Digitally set, temperature and humidity controller with direct digital read out in temperature and percentage Rh.
    6. Low pressure boiler to generate steam for chamber humidification.
    7. Well balanced refrigeration system CFC free.
    8. Double walled construction inner chamber S.S. and outside of mild steel beautifully powder coated.
    9. The chamber is provided with modular removable shelves made of S.S. for complete flexibility in use.
    10. A key lockable insulated door having positive door gasket seals doors perfectly.
    11. Control panel mounted on the top of the unit.
    12. It works on 230 volts AC only.

    Optional Accessories

    1. For humidity upto 98% Rh imported sensor.
    2. Printer interface facility to connect printer.
    3. PC connection with software.

    Sizes Available: (Round) Rating Watts-1500
    20cm (8") dia. Rectangular Rating Watts

    • S. No. Size in Inches (H×W×D)
    • 1. 3 Cu. Ft(90 Ltr) (45×45×50 Cm.)
    • 2. 6 Cu. Ft(170 Ltr) (50×50×70 Cm.)
    • 3. 10 Cu. Ft(280 Ltr) (55×55×90 Cm.)
    • 4. 12Cu. Ft(320 Ltr) (60×60×90 Cm.)
    Drop An Enquiry Go to top

    MUFFLE FURNACE (SS-20)

    1. It is light weight and fast heating equipment.
    2. Most useful for ashing, fasions, igniting and heat treating of small parts in chemical, industrial fields, colleges.
    3. Outside body made up of heavy gauge G.I. duly powder coated inner muffle with high temp. Insulating material.
    4. Maximum temperatures 1150˚c & working temperature 1100˚c.
    5. Temp. Controlled by digital temperature controller cum indicator.
    6. Heating elements made of kenthal wire would extremely on the muffle.
    7. Control panel fitted on the top of the units with indicating lamps & switches.
    8. A uniform heat distribution through all 4 sides with kental wire.
    9. A special solid state silver fuse for protection to elements in case of overheating.
    10. Operates solid state silver fuse for protection to elements in case of overheating.
    11. Operates on 230 volts AC only.
    12. Various sizes available.

    STANDARD SIZES AVAILABLE

    • S. No. SIZE RATING WATTS
    • 1. (9"×4×"4") 23×10×10 cm. 2000
    • 2. (10"×5"×5") 25×13×13 cm. 2500
    • 3. (12"×6"×6") 30×15×15 cm. 3500
    • 4. (18"×9"×9") 45×23×23 cm. 7000
    Drop An Enquiry Go to top

    WATER BATH DIGITAL CONTROLLER

    1. Double walled in construction.
    2. Inner chamber S.S. and outer made of M.S. with powder coating.
    3. Temp. Range 5˚c above ambient to 95˚c accuracy ±2˚c.
    4. Temp. Controlled by capillary type thermostat.
    5. Top lid with concentric rings made of stainless steel.
    6. The gap between the inner and outer chamber filled with
    7. Glass wool insulation to minimize heat loss.
    8. Immersion type heater should be provided.
    9. Long lasting elements.
    10. Concentric rings to use flask from 50ml to 500ml capacity.

    STANDARD SIZES AVAILABLE

    • S. No. SIZE DIMENSIONS
    • 1. 6 hole 35×25×10 cm
    • 2. 12 hole 40×30×10 cm.
    Drop An Enquiry Go to top

    SEROLOGICAL WATER BATH

    1. Double walled filled with high grade glass wool insulation between the two chambers.
    2. Outer chamber made of M.S. with powder coating and inner chamber made of stainless steel.
    3. Temp. Controlled by thermostat.
    4. Temp. Range 5˚c above ambient to 60˚c.

    STANDARD SIZES AVAILABLE

    • S. No. SIZE DIMENSIONS
    • 1. 2 Rack 250
    • 2. 4 Rack 500
    Drop An Enquiry Go to top

    TRAY DRYER

    Suitable for heat treatment, baking and drying applications in industries or institutes engaged in the production of vaccines. Tablets, bottle sterilizing, baking breads or biscuits, drying chemicals, PCB processing, Armature windings, soaking electronic components like yoke, coils, ETH coils, transformers etc.
    CONSTRUCTION: - The contraction is double walled on sturdy angle iron frame with both inner and outer wall of thick CRC sheet which is duly pretreated for surface treatment & finished with powder coating paint. The inner wall is painted with high temp. Aluminium paint to withstand long duration heating cycles normally required in industrial application, and outer wall is finished with powder coated paint. The 75 mm gap between the two walls is filled with high grade glass wool insulation to prevent loss of heat and thereby saving energy. Air is circulated by heavy duty blower to maintain inside temperature. Uniformity with minimum temp. gradient throughout the working chamber. Brackets to support the heavily laden perforated trays at different height are provided on the sides of inner chamber. The front door with sturdy hinges is also double walled with gap between two walls filled with glass wool insulation. The door also has system to prevent opening.
    HEATING: - Heating is done by tubular air heaters placed in the moving air path. These are interlocked with blower. Ventilation with adjustable opening on the top facilities flueing away of any fumes or vapours produced during the process.
    TEMPERATURE CONTROL: - The temperature is controlled by digital temperature controller cum indicator with an accuracy of 5˚c over range of 50˚c to 250˚c, ±5˚c. The equipment is tested for continuous performance & safe operation is out most modern testing laboratory. It securely packed to avoid any transmit damage during dispatch.
    CONTROL PANEL:- The control panel includes a main switch to ON/OFF the units, mains indicator and digital temperature controller, heater controller cum indicator to maintain & observe the temperature.
    POWER SUPPLY: - The unit is supplied complete in all respect. It is suitable to work on 220 V, 50 HZ single phase or 440 V; three phase AC depending upon the size.

    OPTIONAL ACCESSORIES

    1. Timer

    STANDARD SIZES AVAILABLE

    • S. No. W D H TRAY LOAD
    • 1 430 840 915 12 4 KW
    • 2 915 840 915 24 6 KW
    • 3 965 1275 1450 48 10 KW
    • 4 965 1700 1700 96 20 KW
    Drop An Enquiry Go to top